2.5 leveling kit

[mr.gore]

just bought a 2019 trd off road, has any one leveled it 2.5 inch in front and 1 inch block in the back? pics?

 

[OR17TRD]

Welcome to the forum. Lots of people have that set up. I’m sure there are lots of pictures on the net.

 

[B-Man]

Welcome to the forum!

 

[SomeDirtyCuban]

Ish I have 2.25 front and 2.5 rear with 1 in block, Bilstein 5100 and deaver AAL

 

[paughms]

just bought a 2019 trd off road, has any one leveled it 2.5 inch in front and 1 inch block in the back? pics?

I've got a 19 TRD Offroad on the way (~5/20) 2-3" front 1" rear leveling kit to be installed along with a TRD intake.

 

[paughms]

They told me this truck has the same leveling kit.

 

[mr.gore]

They told me this truck has the same leveling kit.
View attachment 25763

doesn’t look too bad, mine as of now sits 35.5 (f) inches from the ground to bottom of fender and 37 (r) inch. going for 38 inch all around

 

[warakesTaco]

They told me this truck has the same leveling kit.
View attachment 25763

Love that stance. Bought my truck and it came with a level kit but the front is a tad lower than the back and it drives me crazy lol looks like a 2 block in the back with a 1.5” in the front.

 

[kp.taco]

This^^ looks like it could use another inch on the rear. I can't stand the bro lean look. This is how my truck looks... for now anyway

 

[paughms]

Might be the angle of the dangle.

 

[rut1095]

If you go above 2” you will want to look at replacing UCA. Also 2.5” front and 1” rear will give you a Carolina squat. I went 2”/1” and it comes out level. Running 275/70/17 with a -12 offset with no rubbing.

 

[VBTacoma]

I had 3” in the front and 1” in the rear. It definitely could have used 2” rear. You can go up to 3” without messing with the UCAs. Above 3” is when you need to replace them or you’ll eat the tires up in about a year.

 

[mr.gore]

View attachment 25840
I had 3” in the front and 1” in the rear. It definitely could have used 2” rear. You can go up to 3” without messing with the UCAs. Above 3” is when you need to replace them or you’ll eat the tires up in about a year.

looks nice! do you know how high the front/ rear sit before and after you leveled it?

 

[VBTacoma]

looks nice! do you know how high the front/ rear sit before and after you leveled it?

No sorry. I know it was about 1” lower in the rear. I don’t have the truck anymore to be able to give you any measurements.

 

[OR17TRD]

No sorry. I know it was about 1” lower in the rear. I don’t have the truck anymore to be able to give you any measurements.

Did you sale it and get a second gen?

 

[VBTacoma]

Did you sale it and get a second gen?

Yes I did! Couldn’t be happier.

 

[kp.taco]

Yes I did! Couldn’t be happier.

Yep.. now you've got my twin truck. Lol

 

[VBTacoma]

Haha, yup!