2010 Toyota Tacoma lift recommendations

[Yeemaha]

Just wondering if you double can short bed guys would post some pics of your lifted trucks with some details for help, I want to lift mine but not sure if I want 3 or 6 and I need to keep the tires under the fenders to pass West Virginia inspection and still look good, any help guys? Thanks

 

[silverpataco]

I was in WV this morning back in PA tonight!
I had a 3" setup two months ago. Now 6" BDS
Do you really want my list of everything I've done?

 

[Yeemaha]

Cool, looks killer! I don't want a list of everything just a few questions about lift, do you have to extend brake lines with 6 inch lift and any other problems? And what tire size with lift? Thanks man

 

[silverpataco]

I always extend the brake lines so they don't limit the suspension! 35"x12.5" BFG KO 2's I used my Bilstein 5100's and 2886 OME springs that went in the truck a few months before the 6". Got the fox for the rear with OME Dahkar Springs.

 

[McManzus18]

Here's my OME lift that ended up being just under 4 inches for some reason! 885 Coils in the front and the nitro charger shocks along with the Dakar pack in the back! Easy to install, just took about 6 hours with one other person.

 

[McManzus18]

A quick "before" for reference. I'm 6'1" and sometimes I still find it difficult to get into it, even with the lift only being 3-4 inches... I don't know if you care about that or not, but it might be worth keeping in mind.

 

[dongtown]

I have an '06 and did the Bilstein 5100 suspension lift with an added leaf kit for about $700. It lifted the front about 2.5" and rear about 1.5".
I looks bitchen and is dead level (no stink bug)

Good luck

 

[born2ride619]

Question #1
What kinda driving are you looking on doing? Street? Some off road ?alot of dirt?