OffroadTaco4x4
Well-Known Member
Depends :shifty:
Someone might have drilled out their engine oil plug to fit a 24MM in it. :whistling2:
Engine oil drain plug is 14MM
Front Differential fill & drain plug is a 10MM Hex Bit
Transfer Case fill & drain is 24MM or 15/16
6 spd Manual Transmission fill & drain is 24MM or 15/16
Rear Differential fill & drain is 24MM or 15/16 (you will want to use a 6 point socket, a 12 point can strip it)
I used a 6 point 15/16 on mine since it was nice and tight on the bolt head so no fear of stripping it. My gear oil had never been changed till I did it at 50k so I'm guessing Hercules was employed at the factory to torque them down :blink:
I sprayed liquid wrench on them every 2 days prior to tackling the job and they were still tough to break loose.
Haha thanks man, yeah I picked up a 6 point 24mm and I guess I'll have to go get a 10mm hex, yeah I'm guess mine have never been changed either at 70k