Did you notice much performance or mileage difference?265/75-16 BF KM2
No lift No rub
Love those Ray10s. Still waiting for them to be available.View attachment 10918
16x8 SCS wheels and BF A/T KO2 265/75/16
Had to remove factory front mud flaps, after the I have had no rubbing. No lift on the truck.
Love those Ray10s. Still waiting for them to be available.
Powder taco where did you get those tires from? I like those man! I have stock 17 inch rims tho on my 2014 v6 and I have no lift on my truck.
If you don't mind me asking how much did you pay for both together? And what website?
Napalm,This is my '14 TRD OR DCSB squirrelin' rig
But considering I have a 3" lift with 285s, I'd suggest 265/70 16 17 18... If you intend to get wheels, try to stick with a -6 or 0 offsetView attachment 8746View attachment 8749View attachment 8750View attachment 8751
285 is 0.8" wider than 265 so a spacer is required on stock wheels with a +25 offset. 1.25-1.5" spidertrax spacers work well to clear the UCA. I put 285/75/16 KO2's on MB TKO wheels with -6 offset and have a 3" lift with no rubbing. I didn't want to use wheel spacers.Napalm,
Just making sure since I'm getting new tires this week, I have a 2010 Tacoma with a 3 inch lift, and wanted to put 285/75/16 on there, would I have to use spacers, or get any rubbing..? Nice
265/70/17 is the biggest.I have P265/65R17's on my new 2017 TRD Sport. I wanna keep those wheels. You guys seem pretty knowledgeable so what's the biggest tire I can get without a lift? Also what would you recommend? Please advise. Thanks!
I have P265/65R17's on my new 2017 TRD Sport. I wanna keep those wheels. You guys seem pretty knowledgeable so what's the biggest tire I can get without a lift? Also what would you recommend? Please advise. Thanks!
285/70/17 with a 2.5-3" lift will work. If you have stock +25 offset wheels you'll need spacers for the 285 width. between a 0 or a -6 offset aftermarket wheel works well.Now am I able to put some LT285/70R17 on my '17 TRD Sport? How much do I have to lift it? Am I going to need spacers? Or are those too big for my Tacoma?
Can I keep the stock wheels with those tires?
Post some pictures.Awesome! Just what I needed to know. Thanks brother. I'm new to all this. Been seeing some good ideas out there. Wasn't sure how to go about it at all... I also have some running boards and front bumper guard in mind. With a few other little things here and there should be good. Thanks again OR17TRD!