Want to upgrade wheels/tires with no lift

[Marckudrik]

Thanks man I️ appreciate your help

 

[OR17TRD]

Thanks man I️ appreciate your help

Wheels for the 285/75/16 you’ll want 0 or -6 offset and I’d look for ones that are 16x8 or 16x8.5” I wouldn’t go wider than 8.5” the tire bead gets weaker the wider you go.

 

[Peru4x4]

Check you tube running 33s with no lift, will have to work the inner fenders a little bit.

 

[Ltate81]

What up all...

I am trying to run 17x8.5 6x5.5 with 0 offset and 4.75 backspacing on a stock sr5 2wd...with 265 70 r17 tires. Will this setup work without a lift? If not, what adjustments do I need to make??

 

[OR17TRD]

What up all...

I am trying to run 17x8.5 6x5.5 with 0 offset and 4.75 backspacing on a stock sr5 2wd...with 265 70 r17 tires. Will this setup work without a lift? If not, what adjustments do I need to make??

Welcome to the forum.
Yes it will be fine. Let’s see some pictures.

 

[SomeDirtyCuban]

How about 265/60/18 what is the max size without lifting the truck, let me know...thank you

I ran 265/70/17 on my Taco 16. They we're as big as I could go without rubbing and with my stock TRD sport wheels. Once I upgraded to 17" pro comps the rubbing began and I lifted 2.25 in the front and kept the rear stock.

 

[SomeDirtyCuban]

Better picture

 

[Ltate81]

Welcome to the forum.
Yes it will be fine. Let’s see some pictures.

Some folks say it’ll be close....what if I did a 275 65 r17 instead...

 

[OR17TRD]

Some folks say it’ll be close....what if I did a 275 65 r17 instead...

Those will fit. They are just a little wider. The 0 offset should help the tire clear the UCA.

 

[SomeDirtyCuban]

Some folks say it’ll be close....what if I did a 275 65 r17 instead...

You'd have to do cutting. Otherwise it's do able

 

[Ltate81]

What you think would be safest without cutting...

 

[SomeDirtyCuban]

There's a guy on YouTube runs 35 but I'm pretty sure he cut alot to get that to work. But I just think that's stupid. Lift it then go bigger but don't push it.

 

[SomeDirtyCuban]

What you think would be safest without cutting...

If you want bigger tires with no lift. 265/70/17 I have falken wild peaks
Or with 3" lift you can run 33"s fine
6" lift 35"s.

 

[SomeDirtyCuban]

I'm currently running 265/70/17 on 17x12.5 pro comp vertigo's, and a pro comp 2.25" lift in the front.
Later on when I deem it necessary I'll upgrade to 33s.

 

[Ltate81]

If you want bigger tires with no lift. 265/70/17 I have falken wild peaks
Or with 3" lift you can run 33"s fine
6" lift 35"s.

I really just want a 17 inch wheel and a good all terrain tire...probably won’t lift.

 

[OR17TRD]

What you think would be safest without cutting...

Either one will work without cutting. The 265/70/17 is 31.6”x10.4”
The 275/65/17 is 31.1”x10.8”
The 0 offset will allow the .4” to clear the UCA and you shouldn’t have any rubbing.

 

[Ltate81]

Thanks y’all. I appreciate the good info. Will get pics up after!

 

[OR17TRD]

I'm currently running 265/70/17 on 17x12.5 pro comp vertigo's, and a pro comp 2.25" lift in the front.
Later on when I deem it necessary I'll upgrade to 33s.

How your tires are staying on your rims is a miracle.

 

[SomeDirtyCuban]

How your tires are staying on your rims is a miracle.

According to 4wheel parts it's the biggest I could go lol I have now problems with them

 

[SomeDirtyCuban]

According to 4wheel parts it's the biggest I could go lol I have now problems with them

I also could be wrong about the offset lol